Back to products
View technical drawing

RONIS ELP1 1 cylinder

About

The ELP range of door locks are used to control access points (hatches, doors, gates ...) which can include transformers. The main feature of the ELP range is to ensure the final key is trapped inside the lock whilst the electrical equipment door is open. The key can only be removed when the door is closed and the strike plate has been re-introduced to the ELP lock. Depending on access requirements for the door, it is possible to have one, two or three cylinders on the lock.

Features

  • Protect people and equipments against medium and high voltage hazards but also against improper operations
  • Our range is made 100% out of metal : boxes made of stainless steel, brass pin cylinders and brass keys for a long lifetime, even in an aggressive environment
  • Large choice of locking combinations : 6 keys series with more than 81.000 possible combinations to ensure the highest level of security in sensitive environments
  • Made in France by the original equipment manufacturer and and the know-how of an experienced team of people
  • Easy to install : no wiring
  • Comprehensive and adaptable product range to support all your applications and future requirements

Specifications

Features

Assembly InformationThis safety lock should be installed by a competent and qualified person, after reading and understanding the following instructions:
1 - Use anti-tamper fixings according to your application (maximum torque 5 N.m)
2 - The locks should be mounted in a non-corrosive environment and compatible with IP indicators
3 - Maximum torque while turning the key: 5 N.m
4 - The key should not be placed under stress.
5 - A bad alignment of the strike or in the course of the bolt may cause malfunction or blocking.
6 - Lubricate the clinder with CK Dry Power Graphite once the product has been assembled.
7 - In case of installing an electromechanical lock, make sure that the power is off before carrying out the wiring.
Application DescriptionHatches - Doors - Gates
Assembly TypePanel
Cylinder MaterialBrass
Housing FinishRaw
Strike Plate Options00 - Standard Strike Plate 01 – L Strike Plate 02 – Straight Strike Plate
Quantity of Cylinders1
Standard FinishNickel
Standard Housing MaterialStainless Steel 304L
Maximum Operating Temperature (celsius)85
Maximum Relative Humidity (%)90
Maximum Storage Temperature (celsius)85
Minimum Operating Temperature-55
Minimum Storage Temperature (celsius)-55

Conflict Minerals ComplianceCertificate on demand
Damp Heat Condensing OptionTest duration 6 days 6 cycles (12h+12h)
T° : 25°C / 55°CRel. Hum. = 95%
IEC 60068-2-30
H2S SO2 SprayLevel 21 days C°=0.5ppm T°C=+25°C Rel Hum = 75%
Compliant to NF-ISO-EN-CEI 68-2-60 (12/1995)
IK CodingIK08
Compliant to IEC 60694 5.13.3
Compliant to IEC 227162
ISO13849 1:2015We, DOM, the manufacturer, declare that proof of use in accordance with most of the rules of ISO 13849-1:2015 Safety of Machinery 2006/42/EC Machinery Directive has been demonstrated and is certified for the components detailed herein and placed on the market.
ISO9001 : 2015Certifiée par les standards de qualité ISO 9001 / 2015
Mean Time To Failure Explained15000 if lubricated
Mechanical Withstand of Locking Bolt or Latch60daN
Compliant to IEC 60947-3
REACHCertificate on demand
ROHSCertificate on demand
Salt Spray240h
Compliant to IEC 68694
Withstand to Free FallHeight 1m on concrete floor - IEC 60068-2-2
Withstand to Key Torsion5 N.m
Withstand to Pulling Force100 daN

Standard FinishNickel
Standard Housing MaterialStainless Steel 304L
Assembly InformationThis safety lock should be installed by a competent and qualified person, after reading and understanding the following instructions:
1 - Use anti-tamper fixings according to your application (maximum torque 5 N.m)
2 - The locks should be mounted in a non-corrosive environment and compatible with IP indicators
3 - Maximum torque while turning the key: 5 N.m
4 - The key should not be placed under stress.
5 - A bad alignment of the strike or in the course of the bolt may cause malfunction or blocking.
6 - Lubricate the clinder with CK Dry Power Graphite once the product has been assembled.
7 - In case of installing an electromechanical lock, make sure that the power is off before carrying out the wiring.
Maintenance InformationThe interlock cylinder should not be lubricated with oil or grease. Please use CK Dry Powder Graphite to lubricate the lock.
The interlock must be inspected every 6 months. These safety inspections should include the following:
1 - Absence of shock/damage on the product
2 - Absence of foreign bodies in the keyhole
3 - Lock fixing OK
4 - Strike plates fixing OK
5 - The keys and lock bolt can only be removed under the correct safety operating conditions.
In case of any detected defect, please contact your nearest DOM Support Department to take the necessary actions.
Net Weight (kg)0.43

Optional Accessories

L shape

L shape

176301010
Straight shape

Straight shape

176302010

Included Accessories

1763-000-10

1763-000-10

176300010

Find a DOM dealer

Find a dealer for DOM products near you :