Back to products
View technical drawing

RONIS 1351-10

About

Our range of cam locks are used in a variety of applications; mechanical locking of circuit-breakers, inverters, and transformers using medium voltage cells. The cam lock is usually seen on the control panel and supports the first phase and of course the final phase of the interlocking process. Our dedicated range of cam locks are compatible with most original equipment manufacturers within this

Features

  • Protect people and equipments against medium and high voltage hazards but also against improper operations
  • Our range is made 100% out of metal : boxes made of stainless steel, brass pin cylinders and brass keys for a long lifetime, even in an aggressive environment
  • Large choice of locking combinations : 6 keys series with more than 81.000 possible combinations to ensure the highest level of security in sensitive environments
  • Made in France by the original equipment manufacturer and and the know-how of an experienced team of people
  • Easy to install : no wiring
  • Comprehensive and adaptable product range to support all your applications and future requirements

Specifications

Features

Key TypeAsymetric - Reversible
Standard Cam Family1729-911
Assembly InformationThis safety lock should be installed by a competent and qualified person, after reading and understanding the following instructions:1 - Use anti-tamper fixings according to your application (maximum torque 5 N.m)2 - The locks should be mounted in a non-corrosive environment and compatible with IP indicators3 - Maximum torque while turning the key: 5 N.m4 - The key should not be placed under stress.5 - A bad alignment of the strike or in the course of the bolt may cause malfunction or blocking.6 - Lubricate the clinder with CK Dry Power Graphite once the product has been assembled.7 - In case of installing an electromechanical lock, make sure that the power is off before carrying out the wiring.
Application DescriptionCircuit-breakers - Inverters - Transformers
Assembly TypeSurface
Cylinder MaterialBrass
DriveM11 x 1
RotorM22 x 0.8 flat of 19
Quantity of Cylinders1
Standard FinishNickel
Maximum Operating Temperature (celsius)85
Maximum Relative Humidity (%)90
Maximum Storage Temperature (celsius)85
Minimum Operating Temperature-55
Minimum Storage Temperature (celsius)-55

Ingress Protection Rating4X Compliant to IEC 60694 5.13.1
Conflict Minerals ComplianceCertificate on demand
Damp Heat Condensing OptionTest duration 6 days 6 cycles (12h+12h) T° : 25°C / 55°CRel. Hum. = 95%IEC 60068-2-30
H2S SO2 SprayLevel 21 days C°=0.5ppm T°C=+25°C Rel Hum = 75%Compliant to NF-ISO-EN-CEI 68-2-60 (12/1995)
IK CodingIK08 Compliant to IEC 60694 5.13.3Compliant to IEC 227162
ISO13849 1:2015We, DOM, the manufacturer, declare that proof of use in accordance with most of the rules of ISO 13849-1:2015 Safety of Machinery 2006/42/EC Machinery Directive has been demonstrated and is certified for the components detailed herein and placed on the market.
ISO9001 : 2015Certifiée par les standards de qualité ISO 9001 / 2015
Mean Time To Failure Explained15000 if lubricated
Mechanical Withstand of Locking Bolt or Latch60daNCompliant to IEC 60947-3
REACHCertificate on demand
ROHSCertificate on demand
Salt Spray240hCompliant to IEC 68694
Withstand to Free FallHeight 1m on concrete floor - IEC 60068-2-2
Withstand to Key Torsion5 N.m
Withstand to Pulling Force100 daN

Standard FinishNickel      
      Assembly InformationThis safety lock should be installed by a competent and qualified person, after reading and understanding the following instructions:1 - Use anti-tamper fixings according to your application (maximum torque 5 N.m)2 - The locks should be mounted in a non-corrosive environment and compatible with IP indicators3 - Maximum torque while turning the key: 5 N.m4 - The key should not be placed under stress.5 - A bad alignment of the strike or in the course of the bolt may cause malfunction or blocking.6 - Lubricate the clinder with CK Dry Power Graphite once the product has been assembled.7 - In case of installing an electromechanical lock, make sure that the power is off before carrying out the wiring.
Maintenance InformationThe interlock cylinder should not be lubricated with oil or grease. Please use CK Dry Powder Graphite to lubricate the lock.The interlock must be inspected every 6 months. These safety inspections should include the following:1 - Absence of shock/damage on the product2 - Absence of foreign bodies in the keyhole3 - Lock fixing OK4 - Strike plates fixing OK5 - The keys and lock bolt can only be removed under the correct safety operating conditions.In case of any detected defect, please contact your nearest DOM Support Department to take the necessary actions.      
Net Weight0.11      

Optional Accessories

Standard Key

Standard Key

Standard Key
High Security Key

High Security Key

High Security key
Cylinder shutter

Cylinder shutter

6980120001

Find a DOM dealer

Find a dealer for DOM products near you :