The ELC range of exchange boxes controls more complex shutdown procedures, by bringing together a series of keys, trapping them inside the exchange box, before releasing a final key in accordance with your shutdown protocol. There can be many options on the configuration of trapped keys and released keys from the ELC Range,. Offering complete control on a system shutdown. We offer a wide range of ELC exchange boxes to cover your project requirements.
| Standard Finish | Nickel |
| Standard Housing Material | Stainless Steel 304L |
| Assembly Information | This safety lock should be installed by a competent and qualified person, after reading and understanding the following instructions: 1 - Use anti-tamper fixings according to your application (maximum torque 5 N.m) 2 - The locks should be mounted in a non-corrosive environment and compatible with IP indicators 3 - Maximum torque while turning the key: 5 N.m 4 - The key should not be placed under stress. 5 - A bad alignment of the strike or in the course of the bolt may cause malfunction or blocking. 6 - Lubricate the clinder with CK Dry Power Graphite once the product has been assembled. 7 - In case of installing an electromechanical lock, make sure that the power is off before carrying out the wiring. |
